BOYSEN Wallguard B‑5715 Dirt Resisting Exterior Latex Paint

BOYSEN®® Wallguard™ B‑5715 Dirt Resisting Exterior Latex Paint

BOYSEN®® Wallguard™ Dirt Resisting Latex is a new breed of latex paint that has a very high resistance to dirt, dust, smog, and mildew. It can be painted even in a rigorous environment where there is a very high concentration of airborne pollutants. It is suitable to be used in industrial areas and along highways. It is specially fit for repainting medium and high-rise buildings where the need to preserve a freshly painted look with less maintenance is of utmost importance.
Download Brochure

Technical Data

Principal Uses

It is ideal as an exterior finish for newly constructed buildings as well as for repainting old structures.

Vehicle Type

Acrylic

Finish

Semi-Gloss

VOC
(±2.0 g/L)

40.4 g/L

Dry Time

Touch: 1 hour
Recoat: 2 hours
*Measured at 25°C and 50% relative humidity

Density
(±0.05 kg/L)

1.20 kg/L

Theoretical Coverage

30-35 sq. m.
* per 4-Liters at 1.7-1.4 mils DFT
*Depending on surface texture and porosity

Tinting

Will accept BOYSEN®® Latex Colors at a maximum level of ¼ Liter per 4-Liter can. Take note that B‑1466 Hansa Yellow and B‑1407 Toluidine Red are not recommended for Wallguard.

Thinning
Solvent

Use as supplied. If necessary, thin with not more than ½ Liter of clean water per 4-Liter can.

Clean-up
Solvent

Water

Packaging

4-Liters and 16-Liters

Application

By brush, roller, or airless spray

FEATURES

BOYSEN®® Wallguard™ Dirt Resisting Latex is 100% acrylic. It is highly resistant to alkali, mildew, airborne pollutants and dust. It has good exterior durability and it resists fading, cracking, and peeling. It also has outstanding gloss retention due to its superior block and scrub resistance.

SURFACE PREPARATION

New Concrete

Allow new concrete to dry for 14-28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. If neutralizing, treat surface with a solution of 1 part BOYSEN®® Masonry Neutralizer B‑44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting. However, if the concrete has been cured for more than 28 days, there is no need for neutralizer.

Repainting

Scrape off all loose, scaling, flaking, and peeling paint manually or by using BOYSEN®® Paint and Varnish Remover B‑141, as necessary. Wash surfaces clean and completely remove chemical residue. Let it dry.
For repainting concrete with chalky old paint, use BOYSEN®® Chalk Blocker™ B‑7304 as surface conditioner. In case of mildew infestation, treat with a bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before cleaning off residue. Let dry.

PAINTING SCHEDULE

New Concrete

Primer:
BOYSEN®® Acrytex™ Primer B‑1705
Putty:
BOYSEN®® Acrytex™ Cast B‑1711
Topcoat:
BOYSEN®® Wallguard™ B‑5715 (2 coats)

Repainting

Topcoat:
Apply two coats of BOYSEN®® Wallguard™ B‑5715 on properly prepared surface

Colors

* Use only BOYSEN®® Latex Colors for tinting to achieve pastel shades. To produce dark shades, use factory-mixed colors. Do not use B‑1466 Hansa Yellow and B‑1407 Toluidine Red for exterior applications.
* For technical reasons connected with color reproduction in print and paint manufacturing, these colors may not exactly match actual paint color.
For MSDS requests, please email technical@boysen.com.ph