Concrete
Exterior:
Plain Finish
New
Exterior:
Plain Finish
New
BOYSEN®® Elasti-kote™ Premium
Elastomeric Wall Covering
Concrete
Exterior:
Plain Finish
New
Exterior:
Plain Finish
New
BOYSEN®® Elasti-kote™ Premium
Elastomeric Wall Covering
BOYSEN®® Elasti-kote™ Premium Elastomeric Wall Covering
BOYSEN®® Elasti-kote™ is a 100% acrylic water-based elastomeric wall paint that is especially formulated to bridge micro/hairline cracks and crevices. It provides good waterproofing and protection especially for high-rise buildings. As a well-formulated acrylic elastomeric paint, it is also UV resistant and has excellent weatherability.
It has superior crack bridging ability due to its excellent elongation and tensile strength. It is also able to cover hairline cracks and crevices and prevent the emergence of unsightly efflorescence.
SURFACE PREPARATION
Allow new concrete to dry for 14-28 days under normal weather conditions before painting.
Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar.
If neutralizing, treat surface with a solution of 1 part BOYSEN®® Masonry Neutralizer B‑44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting.
Note: If the concrete has been cured for more than 28 days, there is no need for neutralizer.
PAINTING SCHEDULE
Option 1:
Without Fibermesh Reinforcing Membrane
Without Fibermesh Reinforcing Membrane
1st coat:
BOYSEN®® Elasti-kote™ Sealer B‑5800
BOYSEN®® Elasti-kote™ Sealer B‑5800
2nd coat:
BOYSEN®® Elasti-kote™ Basecoat B‑5805
BOYSEN®® Elasti-kote™ Basecoat B‑5805
Spot Putty:
BOYSEN®® Elasti-kote™ Putty B‑5811 (if needed)
BOYSEN®® Elasti-kote™ Putty B‑5811 (if needed)
3rd coat:
BOYSEN®® Elasti-kote™ Basecoat B‑5805 (for puttied areas)
BOYSEN®® Elasti-kote™ Basecoat B‑5805 (for puttied areas)
4th & 5th coat:
BOYSEN®® Elasti-kote™ Topcoat B‑5815
BOYSEN®® Elasti-kote™ Topcoat B‑5815
Option 2:
With Fibermesh Reinforcing Membrane
With Fibermesh Reinforcing Membrane
1st coat:
BOYSEN®® Elasti-kote™ Sealer B‑5800
BOYSEN®® Elasti-kote™ Sealer B‑5800
2nd coat:
BOYSEN®® Elasti-kote™ Basecoat B‑5805
BOYSEN®® Elasti-kote™ Basecoat B‑5805
Reinforcing Membrane:
Fibermesh Matting (1.2mm x 60g/sqm x 1m x 100m)
Fibermesh Matting (1.2mm x 60g/sqm x 1m x 100m)
3rd coat:
BOYSEN®® Elasti-kote™ Basecoat B‑5805
BOYSEN®® Elasti-kote™ Basecoat B‑5805
4th & 5th coat:
BOYSEN®® Elasti-kote™ Topcoat B‑5815
BOYSEN®® Elasti-kote™ Topcoat B‑5815
SERVICE CONDITIONS
Preferably applied by a BOYSEN®® accredited painting contractor.
Tinting is not recommended. All colors should be factory-mixed.
Colors
B‑5815
White
* For factory-mixed colors, please visit accredited BOYSEN®® dealers near or within your area.
* For technical reasons connected with color reproduction in print and paint manufacturing, these colors may not exactly match actual paint color.
SQM
For alternative smooth plastering.
w/o Fiber Mesh
w/ Fiber Mesh
For conventional concrete plastering
w/o Fiber Mesh
w/ Fiber Mesh
| Paint System | Product | Quantity | |
For MSDS requests, please email technical@boysen.com.ph