Wood
Interior: Decorative
and Special Finishes
Repaint
Interior: Decorative
and Special Finishes
Repaint
BOYSEN®® DECORe™
Sandino™
Wood
Interior: Decorative
and Special Finishes
Repaint
Interior: Decorative
and Special Finishes
Repaint
BOYSEN®® DECORe™
Sandino™
BOYSEN®® DECORe™ Sandino™
BOYSEN®® DECORe™ Sandino™ is a unique, water-based, semi-transparent decorative paint system that exudes the richness of sand with lustrous accents of gold or silver.
There's no need for elaborate intermixing of colors, complicated layering techniques, or sophisticated equipment. Effortless brushing is all that's needed to achieve this very exquisite finish.
BOYSEN®® DECORe™ Sandino™ is available in Sandino™ Gold B‑4960.
SURFACE PREPARATION
Scrape off all loose, scaling, flaking, and peeling paint manually or by using BOYSEN®® Paint and Varnish Remover B‑141, as necessary. Wash surfaces clean and completely remove chemical residue. Let it dry.
In case of mildew infestation, treat with a bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before cleaning off residue. Let dry.
Surface to be repainted should be clean and dry, free from oil, grease, dust and dirt, and all possible contaminants.
PAINTING SCHEDULE
Primer (for resulting bare wood): BOYSEN®® Flatwall Enamel B‑800
Putty:
BOYSEN®® Plasolux Glazing Putty B‑311
Colored Basecoat (2 coats): BOYSEN®® Flatwall Enamel B‑800 (any desired plant-mixed color)
Decorative Topcoat:
Using a DECORe™ brush, apply Sandino™ in light, crisscrossing strokes, spreading it as evenly as possible.
Avoid lap marks by applying the product in sections. Leave a small gap in between the sections then just spot apply Sandino™ on the gaps right after to even it out.
BOYSEN®® Plasolux Glazing Putty B‑311
Colored Basecoat (2 coats): BOYSEN®® Flatwall Enamel B‑800 (any desired plant-mixed color)
Decorative Topcoat:
Using a DECORe™ brush, apply Sandino™ in light, crisscrossing strokes, spreading it as evenly as possible.
Avoid lap marks by applying the product in sections. Leave a small gap in between the sections then just spot apply Sandino™ on the gaps right after to even it out.
NOTES
DECORe™ Sandino™ should only be applied as a decorative finish on surfaces that are properly painted with a flat topcoat.
For best results, the color of the flat topcoat should complement the effect of Sandino™ Gold or Sandino™ Silver.
Only use the provided BOYSEN®® DECORe™ Brush. The desired finish may not be achieved if a different material is used.
SQM
Paint System | Product | Quantity | |
Colored Basecoat | BOYSEN®® Flatwall Enamel B‑800 | 10 | L |
Decorative Topcoat | BOYSEN®® DECORe™ Sandino™ | 5 | L |
For MSDS requests, please email technical@boysen.com.ph