BOYSEN®® DECORe™ Sandino™

BOYSEN®® DECORe™ Sandino™ is a unique, water-based, semi-transparent decorative paint system that exudes the richness of sand with lustrous accents of gold or silver.

There's no need for elaborate intermixing of colors, complicated layering techniques, or sophisticated equipment. Effortless brushing is all that's needed to achieve this very exquisite finish.

BOYSEN®® DECORe™ Sandino™ is available in Sandino™ Gold B‑4960.

Download Brochure

SURFACE PREPARATION

Install and secure joints as per manufacturer's recommendations.

Check paint compatibility and recommended drying time of the applied joint compound.

Surface to be painted should be clean and dry, free from dust and dirt and all possible contaminants.

PAINTING SCHEDULE

Primer:
BOYSEN®® Permacoat™ Flat Latex B‑701

Putty:
BOYSEN®® Masonry Putty B‑7311

Colored Basecoat (2 coats): BOYSEN®® Permacoat™ Flat Latex (any desired plant-mixed color)

Decorative Topcoat:

Using a DECORe™ brush, apply Sandino™ in light, crisscrossing strokes, spreading it as evenly as possible.

Avoid lap marks by applying the product in sections. Leave a small gap in between the sections then just spot apply Sandino™ on the gaps right after to even it out.

NOTES

DECORe™ Sandino™ should only be applied as a decorative finish on surfaces that are properly painted with a flat topcoat.

For best results, the color of the flat topcoat should complement the effect of Sandino™ Gold or Sandino™ Silver.

Only use the provided BOYSEN®® DECORe™ Brush. The desired finish may not be achieved if a different material is used.

Paintable Surface Area

SQM

Paint System	Product	Quantity
Primer	BOYSEN®® Permacoat™ Latex Flat Latex B‑701	5	L
Colored Basecoat	BOYSEN®® Permacoat™ Latex Flat Latex	8	L
Decorative Topcoat	BOYSEN®® DECORe™ Sandino™	5	L
Note: Install and secure joints as per manufacturer's recommendation		1

* Quantity shown will only be an estimate

1 Gallon = 4 Liters

Want to try again with a different set of selections?

Start over with the button below

Start Over

For MSDS requests, please email technical@boysen.com.ph