Wood 
 
Interior: Decorative
and Special Finishes
 
 
New
 
 
BOYSEN®® DECORe™
Perlescente™
 
 
Wood 
 
Interior: Decorative
and Special Finishes
 
 
New
 
 
BOYSEN®® DECORe™
Perlescente™
 
 

BOYSEN®® DECORe™ Perlescente™

BOYSEN®® DECORe™ Perlescente™ is a decorative, environment-friendly paint finish that uses natural oxides to create interiors with hints of gold and silver gleaming through its strong or subtle colors. Its technologically advanced formulation blends resins in a water-based solution and provides metallic accents to give your home a beautiful atmosphere of exclusivity and prestige. Using simple techniques, one can easily replicate the stunning effects in any living space.

SURFACE PREPARATION

Surface to be painted should be clean and dry, free from dust, dirt, and other foreign matter.
Hammer all nails deep enough to apply putty.
Sand surface until wood is smooth to the touch.
Dust off surfaces completely then wipe with a clean rag.

PAINTING SCHEDULE

Prime bare wood with BOYSEN®® Flatwall Enamel B‑800.

Apply 1-2 coats of your desired matching DECORe™ Undercoat using brush, roller or airless spray.

Gradually mix about 200 grams of the matching Perla Di Luce toner into the DECORe™ Perlescente™ Base while ensuring that all metallic powder is fully wet. Use a mechanical mixer or power mixer to ensure full luster of the powder.

Apply the prepared mixture over the DECORe™ Undercoat using cross-hatch strokes. Blend in with the provided BOYSEN®® DECORe™ Brush.

After 5-10 minutes, smooth over the surface using the BOYSEN®® DECORe™ Scraper.

NOTES

Do not thin mixture with water or any solvent.
To obtain a perfect finish, it is necessary to apply BOYSEN®® DECORe™ Perlescente™ over its matching Undercoat. For example, if you choose the Pisa (green) color, the DECORe™ Perlescente™ B‑4858 Pisa Base must be applied on its B‑48055 Pisa Undercoat. If you choose Lucca (blue), DECORe™ Perlescente™ B‑4840 Lucca Base is applied after the B‑48054 Lucca Undercoat.
Only use the provided BOYSEN®® DECORe™ Brush and Scraper. The desired finish may not be achieved if a different material is used.

Colors

Perlescente™ Base
B‑4861
Arezzo Base

w/ B‑4806
Perla Di Luce Gold
B‑4858
Pisa Base

w/ B‑4803
Perla Di Luce Emerald
B‑4840
Lucca Base

w/ B‑4804
Perla Di Luce Sapphire
B‑4876
Siena Base

w/ B‑4808
Perla Di Luce Garnet
B‑4870
Grosseto Base

w/ B‑4807
Perla Di Luce Ruby
B‑4830
Livorno Base

w/ B‑4808
Perla Di Luce Garnet
* These are pearlescent pigments that give luster to the resulting finish. Each Perlescente™ Base will have a corresponding pigment, the colors of which are based on shades of precious stones minerals.
* For technical reasons connected with color reproduction in print and paint manufacturing, these colors may not exactly match actual paint color.
SQM
Paint SystemProductQuantity
PrimerBOYSEN®® Flatwall Enamel B‑8005L
Putty (Full)BOYSEN®® Plasolux Glazing Putty B‑31112L
UndercoatBOYSEN®® DECORe™ Perlescente™ Colored Undercoat10L
TopcoatBOYSEN®® DECORe™ Perlescente™ Base3.0L
Thinning Solvent for PrimerBOYSEN®® Paint Thinner B‑03402L
Thinning Solvent for PuttyBOYSEN®® Paint Thinner B‑03402L
Metallic PigmentBOYSEN®® DECORe™ Perlescente™ Perla Di Luce240g
* Quantity shown will only be an estimate
  1 Gallon = 4 Liters
Want to try again with a different set of selections?
Start over with the button below
For MSDS requests, please email technical@boysen.com.ph