Concrete 
 
Interior:
Plain Finish
 
 
New
 
 
BOYSEN®® BUG OFF™ Anti-Insect
Paint with Artilin
 
 
Concrete 
 
Interior:
Plain Finish
 
 
New
 
 
BOYSEN®® BUG OFF™ Anti-Insect
Paint with Artilin
 
 

BOYSEN®® BUG OFF™ Anti-Insect Paint with Artilin

BOYSEN®® BUG OFF™ with Artilin Anti-Insect Technology is a water-based, low-VOC, anti- insect paint that is scientifically proven to kill disease-causing insects like mosquitoes for at least 3 years after application.
FDA REG # HSR-8103

SURFACE PREPARATION

Allow new concrete to dry for 14-28 days under normal weather conditions before painting.
Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar.
If neutralizing, treat surface with a solution of 1 part BOYSEN®® Masonry Neutralizer B‑44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting.
Note: If the concrete has been cured for more than 28 days, there is no need for neutralizer.

PAINTING SCHEDULE

Primer:
BOYSEN®® Permacoat™ Flat Latex B‑701
Putty:
BOYSEN®® Masonry Putty B‑7311

Topcoat (2 coats): BOYSEN®® BUG OFF™ Anti Insect Paint with Artilin

Colors

* For site-mixing pastel to medium hues, use only BOYSEN®® Latex Colors. For darker shades, you may request for factory-mixed colors by visiting accredited BOYSEN®® dealers near or within your area.
* For technical reasons connected with color reproduction in print and paint manufacturing, these colors may not exactly match actual paint color.
SQM
For alternative smooth plastering.
For conventional concrete plastering.
Paint SystemProductQuantity
SkimcoatKonstrukt™ Permaplast™ K‑201 High‑Performance Acrylic12L
PrimerBOYSEN®® Permacoat™ Latex Flat Latex B‑7015L
Putty (Spot)BOYSEN®® Masonry Putty B‑73115L
TopcoatBOYSEN®® BUG OFF™8L
Check and follow standard system of Konstrukt™ Permaplast™ products.
* Quantity shown will only be an estimate
  1 Gallon = 4 Liters
Want to try again with a different set of selections?
Start over with the button below
For MSDS requests, please email technical@boysen.com.ph