BOYSEN® Schoolboard Paint Green B-655

BOYSEN® Schoolboard Paint Green B-655

DESCRIPTION: BOYSEN® Schoolbaord Paint Green is an alkyd-based paint that dries to a flat finish for classroom blackboards, bulletin boards, and other similar flat surfaces intended for chalk markings.

PRINCIPAL USES: It is ideal for wooden surfaces.

FINISH: Flat

DRY TIME:
Touch: 2 - 4 hours
Recoat: 12 hours

THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq.m. 
*Depending on surface texture and porosity

TINTING: Not applicable

THINNING SOLVENT: Thin with not more than 1-Liter of BOYSEN® Paint Thinner B-0340 per 4-Liter can of BOYSEN alkyd enamel products.

CLEAN-UP SOLVENT: BOYSEN® Paint Thinner B-0340 

PACKAGING: 1-Liter and 4-Liters

APPLICATION: By brush or roller

DESCRIPTION: BOYSEN® Schoolbaord Paint Green is an alkyd-based paint that dries to a flat finish for classroom blackboards, bulletin boards, and other similar flat surfaces intended for chalk markings.

PRINCIPAL USES: It is ideal for wooden surfaces.

FINISH: Flat

DRY TIME:
Touch: 2 - 4 hours
Recoat: 12 hours

THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq.m. 
*Depending on surface texture and porosity

TINTING: Not applicable

THINNING SOLVENT: Thin with not more than 1-Liter of BOYSEN® Paint Thinner B-0340 per 4-Liter can of BOYSEN alkyd enamel products.

CLEAN-UP SOLVENT: BOYSEN® Paint Thinner B-0340 

PACKAGING: 1-Liter and 4-Liters

APPLICATION: By brush or roller

SURFACE PREPARATION:
Surface to be painted should be clean and dry, free from dust, dirt, and other foreign matter. Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting.

For repainting, scrape off all loose, scaling, flaking, and peeling paint as necessary. Make sure the surface is clean, dry, and good weather persists prior to painting. Prime with BOYSEN® Flatwall Enamel B-800 before recoating.

PAINTING SCHEDULE:
1st coat: BOYSEN® Flatwall Enamel B-800
Putty: BOYSEN®  Plasolux Glazing Putty B-311
2nd & 3rd coat: BOYSEN® Schoolboard Green B-655