BOYSEN® Quick Drying Enamel

BOYSEN® Quick Drying Enamel

DESCRIPTION: BOYSEN® Quick Drying Enamel is an alkyd type paint that provides substantial durability while still being a fast drying paint. It is formulated to give a tough and beautiful finish on wood and metal surfaces. Its superior hiding properties, combined with an exceptionally high gloss level, leads to an excellent, long-lasting finish.

PRINCIPAL USES: Ideal for interior and exterior wood and metal surfaces.

FINISH: Gloss

DRY TIME:
Touch: 5 hours
Recoat: 8 - 12 hours
Full cure: 3 days

THEORETICAL COVERAGE PER 4-LITERS: 30 - 35 sq.m. 
*Depending on surface texture and porosity

TINTING: Will accept BOYSEN® Oil Tinting Colors at a maximum level of ¼ Liter per 4-Liter can. Take note that B-2319 Hansa Yellow and B-2315 Bulletin Red are for interior painting only.

THINNING SOLVENT: Thin with not more than 1-Liter of BOYSEN® Paint Thinner B-0340 per 4-Liter can of BOYSEN alkyd enamel products.

CLEAN-UP SOLVENT: BOYSEN® Paint Thinner B-0340 

PACKAGING: ¼ Liter, 1 Liter, and 4 Liters (available in 16-Liters for B-600 White)

APPLICATION: By brush or roller

AVAILABLE COLORS:
B-600    White               
B-621    Ivory                         
B-630    Silver Gray               
B-631    Medium Gray           
B-640    Royal Blue               
B-642    Sky Blue                   
B-647    Delft Blue                
B-650    Nile Green               
B-651    Dark Green             
B-656    Jade Green             
B-658    Emerald Green       
B-661    Lemon Yellow
B-665    Caterpillar Yellow
B-671    Bright Red
B-671    International Red
B-673    Maroon
B-676    Orange
B-680    Chocolate Brown
B-681    Mahogany
B-683    Caramel Brown
B-685    Sammy Brown
B-690    Black
B-691    Flat Black

DESCRIPTION: BOYSEN® Quick Drying Enamel is an alkyd type paint that provides substantial durability while still being a fast drying paint. It is formulated to give a tough and beautiful finish on wood and metal surfaces. Its superior hiding properties, combined with an exceptionally high gloss level, leads to an excellent, long-lasting finish.

PRINCIPAL USES: Ideal for interior and exterior wood and metal surfaces.

FINISH: Gloss

DRY TIME:
Touch: 5 hours
Recoat: 8 - 12 hours
Full cure: 3 days

THEORETICAL COVERAGE PER 4-LITERS: 30 - 35 sq.m. 
*Depending on surface texture and porosity

TINTING: Will accept BOYSEN® Oil Tinting Colors at a maximum level of ¼ Liter per 4-Liter can. Take note that B-2319 Hansa Yellow and B-2315 Bulletin Red are for interior painting only.

THINNING SOLVENT: Thin with not more than 1-Liter of BOYSEN® Paint Thinner B-0340 per 4-Liter can of BOYSEN alkyd enamel products.

CLEAN-UP SOLVENT: BOYSEN® Paint Thinner B-0340 

PACKAGING: ¼ Liter, 1 Liter, and 4 Liters (available in 16-Liters for B-600 White)

APPLICATION: By brush or roller

AVAILABLE COLORS:
B-600    White               
B-621    Ivory                         
B-630    Silver Gray               
B-631    Medium Gray           
B-640    Royal Blue               
B-642    Sky Blue                   
B-647    Delft Blue                
B-650    Nile Green               
B-651    Dark Green             
B-656    Jade Green             
B-658    Emerald Green       
B-661    Lemon Yellow
B-665    Caterpillar Yellow
B-671    Bright Red
B-671    International Red
B-673    Maroon
B-676    Orange
B-680    Chocolate Brown
B-681    Mahogany
B-683    Caramel Brown
B-685    Sammy Brown
B-690    Black
B-691    Flat Black

SURFACE PREPARATION:
Wooden Surfaces
Surface to be painted should be clean and dry, free from dust, dirt, and other foreign matter. Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting.

For repainting, scrape off all loose, scaling, flaking, and peeling paint as necessary. Make sure the surface is clean, dry, and good weather persists prior to painting. Prime with BOYSEN® Flatwall Enamel B-800 before recoating.

Metal Surfaces
Wipe the surface with a rag soaked in paint thinner to remove grease, oil, wax and other foreign matter. For new galvanized surfaces, etch the surface by applying 10% BOYSEN® Metal Etching Solution B-71 (Dilute 1 part of B-71 to 9 parts water). Rinse with water and dry immediately.

Unpainted galvanized surfaces that have been exposed for 6 months or more need not be etched.

For recoating pre-painted galvanized surfaces in good condition, sand lightly then wipe the surface with a clean rag before applying paint. Remove all loose paint film to sound surface. Spot prime bare substrate.

For corroded galvanized surfaces, remove rust by wire brushing and use BOYSEN® Metal Etching Solution B-71. Let it stay for 10-15 minutes. Be sure to remove all remaining residue. Immediately prime after drying.


PAINTING SCHEDULE:
Wooden Surfaces
1st coat: BOYSEN® Flatwall Enamel B-800
Putty: BOYSEN® Plasolux Glazing Putty B-311
2nd & 3rd coat: BOYSEN® Quick Drying Enamel (any desired color)

Metal Surfaces
1st coat: BOYSEN® Red Oxide Metal Primer B-310 or BOYSEN® Rust-Off™ B-330
2nd & 3rd Coat: BOYSEN® Quick Drying Enamel (any desired color)

Choose Color

For technical reasons connected with color reproduction and paint manufacturing, these patterns may not exactly match the paint color.

B-600 White
 
B-621 Ivory
 
B-630 Silver Gray
 
B-631 Medium Gray
 
B-640 Royal Blue
 
B-642 Sky Blue
 
B-647 Delft Blue
 
B-650 Nile Green
 
B-651 Dark Green
 
B-656 Jade Green
 
B-658 Emerald Green
 
B-661 Lemon Yellow
 
B-665 Catterpillar Yellow
 
B-670 Bright Red
 
B-671 International Red
 
B-673 Maroon
 
B-676 Orange
 
B-680 Chocolate Brown
 
B-681 Mahogany
 
B-683 Caramel Brown
 
B-685 Sammy Brown
 
B-690 Black
 
B-600 White
 
B-621 Ivory
 
B-630 Silver Gray
 
B-631 Medium Gray
 
B-640 Royal Blue
 
B-642 Sky Blue
 
B-647 Delft Blue
 
B-650 Nile Green
 
B-651 Dark Green
 
B-656 Jade Green
 
B-658 Emerald Green
 
B-661 Lemon Yellow
 
B-665 Catterpillar Yellow
 
B-670 Bright Red
 
B-671 International Red
 
B-673 Maroon
 
B-676 Orange
 
B-680 Chocolate Brown
 
B-681 Mahogany
 
B-683 Caramel Brown
 
B-685 Sammy Brown
 
B-690 Black
 

By clicking "I Accept", you explicitly and unequivocally consent to the collection, processing and storage of your personal data and the use of cookies by Pacific Paint (Boysen) Philippines, Inc. for the purposes described in the Privacy Policy. Please make sure that you have fully read and comprehend the terms in our Privacy Policy before giving your consent and by continuing to browse our site.