BOYSEN® Wallguard™ Dirt Resisting Latex

Introducing a new breed of latex paints that has a very high resistance to dirt, dust, smog and mildew. It can be painted even in a rigorous environment where there is a very high concentration of airborne pollutants.

DESCRIPTION:  BOYSEN® Wallguard™ Dirt Resisting Latex #5715 is suitable to be used near industrial areas and along highways. It is specially suited for repainting medium and high-rise building where the need to maintain a freshly painted look with less maintenance is of prime importance.

Highly Resistant to airborne pollutants and dust

100% Acrylic

Highly alkaline resistant

Resist fading, cracking and peeling

Good exterior durability

Excellent gloss retention

Mildew resistant

Good block and scrub resistance

PRINCIPAL USES: Use BOYSEN® Wallguard™ as an exterior finish for newly constructed building as well as repainting old structures.

PRACTICAL COVERAGE: 25 - 30 square meter / 4 liters /coat

SURFACE DRY: Thirty (30) minutes

DRY FILM THICKNESS: 1.5 mils /coat

OVERCOATING INTERVAL: Allow one hour before recoating.

THINNING: Use as supplied. If necessary, thin with not more than ½ liter of water per 4-liter can

APPLICATION: paint brush, roller or airless spray

PACKAGING: 4-liter cans

AVAILABILITY: Semi-Gloss #5715
COLORANTS: Use only BOYSEN® Latex Colors for tinting to achieve pastel shades. To produce dark shades, use factory mixed colors.


New Masonry:
Allow new masonry to dry for 14 to 28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. Treat new masonry with a solution of 1 part BOYSEN® Masonry Neutralizer #44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting.

Remove all loose, scaling, flaking and peeling off paint using BOYSEN® Paint and Varnish Remover #141, wire brushing, scraping, or water blasting. Let it dry. Sand smooth painted surfaces for improved adhesion. In case of mildew infestation, treat with BOYSEN® Fungicidal Wash Solution #74 or bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing.  To ensure proper treatment, allow to stand on surface for overnight before washing off residue. Let dry.


New Painting:
1st coat: BOYSEN® Acrytex™ Primer #1705
Putty: BOYSEN® Acrytex™ Cast #1711
2nd & 3rd coat: BOYSEN® Wallguard™ Dirt Resisting Latex 

Topcoat: Apply two coats of BOYSEN® Wallguard™ Dirt Resisting Latex on properly prepared surface.                 


Get the Flash Player to see this player.
BOYSEN® Wallguard™ Dirt Resisting Latex