BOYSEN® Elasti-kote™ Elastomeric Wall Covering

BOYSEN® Elasti-kote™ Elastomeric Wall Covering

DESCRIPTION: BOYSEN® Elasti-Kote™ is a 100% acrylic water based elastomeric wall paint that is especially formulated to bridge micro/hairline cracks and crevices thus providing good waterproofing and protection from rain, carbon dioxide or other acidic gases (acid rain).

FEATURES
1. Covers wall hairline cracks and crevices
2. Superior crack bridging ability
3. Prevent unsightly efflorescence emanating from cracks
4. Superb elongation & tensile strength
5. Excellent weather ability
6. Excellent UV resistance
7. Excellent color acceptance
8. Excellent alkali resistance
9. Excellent scrub resistance
10. Very good mildew resistance
11. Lead free and mercury free paint

BENEFITS
1. Protects the building from entry of rainwater, carbon dioxide and other acidic gases
2. Upgrades the integrity of the building
3. Preserves and extends aesthetic appearance of the building thus minimizing repainting

RELEVANT SURFACE CRACK PREPARATION
· Crack < 0.1 mm to 0.3 mm use BOYSEN® Acrytex™ Cast  #1711 as putty
· Crack > 0.3 mm to 1 mm use BOYSEN® Plexibond™ Cementitious Water Proofing System as putty
· Structure/large cracks and above 1mm cracks – refer to civil engineers or architects for appropriate action

APPLICATION: Brush or roller.

DRYING TIME: Dries to touch in 30 minutes. Allow four (4) hours in between coats.

COVERAGE: 15-18 square meters per 4 liters per coat.

THINNING: Thinning is not required.

CLEAN UP: Clean equipment with soap and water after use.

 

DESCRIPTION: BOYSEN® Elasti-Kote™ is a 100% acrylic water based elastomeric wall paint that is especially formulated to bridge micro/hairline cracks and crevices thus providing good waterproofing and protection from rain, carbon dioxide or other acidic gases (acid rain).

FEATURES
1. Covers wall hairline cracks and crevices
2. Superior crack bridging ability
3. Prevent unsightly efflorescence emanating from cracks
4. Superb elongation & tensile strength
5. Excellent weather ability
6. Excellent UV resistance
7. Excellent color acceptance
8. Excellent alkali resistance
9. Excellent scrub resistance
10. Very good mildew resistance
11. Lead free and mercury free paint

BENEFITS
1. Protects the building from entry of rainwater, carbon dioxide and other acidic gases
2. Upgrades the integrity of the building
3. Preserves and extends aesthetic appearance of the building thus minimizing repainting

RELEVANT SURFACE CRACK PREPARATION
· Crack < 0.1 mm to 0.3 mm use BOYSEN® Acrytex™ Cast  #1711 as putty
· Crack > 0.3 mm to 1 mm use BOYSEN® Plexibond™ Cementitious Water Proofing System as putty
· Structure/large cracks and above 1mm cracks – refer to civil engineers or architects for appropriate action

APPLICATION: Brush or roller.

DRYING TIME: Dries to touch in 30 minutes. Allow four (4) hours in between coats.

COVERAGE: 15-18 square meters per 4 liters per coat.

THINNING: Thinning is not required.

CLEAN UP: Clean equipment with soap and water after use.

 

SURFACE PREPARATION
If repainting, remove all loose, scaling, flaking, and peeling off paint by using BOYSEN® Paint and Varnish Remover #141, wire brushing, scraping, or water blasting. Let dry. In case of mildew infestation, treat with Bleach solution (mixture of 1 part bleach and 3 parts water) by swabbing or brushing, allowing it to remain on the surface for twenty four (24) hours. Rinse with water and let dry before painting.

PAINT APPLICATION
1st Coat: BOYSEN® Elasti-Kote™ (Elastomeric Wall Covering) Sealer B-5800
Texture: BOYSEN® Acrytex™ Cast #1711 (by mortar gun spray)
2nd & 3rd Coat: BOYSEN® Elasti-Kote™ (Elastomeric Wall Covering) Basecoat B-5805
4th Coat (Optional): BOYSEN® Elasti-Kote™ (Elastomeric Wall Covering) Topcoat B-5815

Note: To be applied by BOYSEN® ACCREDITED PAINTING CONTRACTORS only.