BOYSEN® Acqua Epoxy™ Acrylic Water-based Epoxy Paint

BOYSEN® Acqua Epoxy™ Acrylic Water-based Epoxy Paint


BOYSEN® Acqua Epoxy™ is a two-component water-based acrylic epoxy paint which has superior chemical, solvent, and stain resistance ideal for concrete floors and structural steel surfaces. It has the further advantage of excellent brushability and easy water clean-up. It is low odor and imparts a UV-resistant finish unlike its solvent-based equivalent.

AVAILABILITY: 4-li packaging with 1-liter curing agent

COVERAGE: 25 to 30 square meters per 4 liters per coat

DRYING TIME: 4 hours

DRY FILM THICKNESS: 1.5 mils

APPLICATION: paint brush, roller, or airless spray

THINNING: Use as supplied.

BOYSEN® Acqua Epoxy™ is a two-component water-based acrylic epoxy paint which has superior chemical, solvent, and stain resistance ideal for concrete floors and structural steel surfaces. It has the further advantage of excellent brushability and easy water clean-up. It is low odor and imparts a UV-resistant finish unlike its solvent-based equivalent.

AVAILABILITY: 4-li packaging with 1-liter curing agent

COVERAGE: 25 to 30 square meters per 4 liters per coat

DRYING TIME: 4 hours

DRY FILM THICKNESS: 1.5 mils

APPLICATION: paint brush, roller, or airless spray

THINNING: Use as supplied.

SURFACE PREPARATION:

1. Allow new masonry to dry for 14 to 28 days under normal weather conditions. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar.

2. Acid etch smooth surfaces with a mixture of muriatic acid and water (1:1 ratio). Allow 2-3 minutes before scrubbing off and rinsing with water. Do not let the solution stay for more than 5 minutes.

3. Let dry before painting.

PAINT APPLICATION:

1. Mix 3 parts of BOYSEN® Epoxy Primer White #2200 with 1 part of its curing agent. Allow 20 minutes induction time then dilute with BOYSEN® Epoxy Reducer #55 at 1:1 ratio. Use resulting mixture as primer. Let dry 6 to 8 hours. Succeeding coats must be applied not more than 7 days after.

2. Mix 4 parts of BOYSEN® Acqua Epoxy™ with 1 part of its curing agent. Allow 20 minutes induction time. Use resulting mixture as topcoat applying at least 3 coats. Let dry 4 hours in between coats. Full hardness develops after 7 days.