Konstrukt™ Lunar Series: Kanyon

Konstrukt™ Lunar Series: Kanyon

DESCRIPTION: Lunar Series

From afar, the moon gleams exquisitely at sundown. It envelopes the night with mysterious aura, silently luring a curious spectator in. Its lulling presence pacifies the hardness of the day. Utterly hypnotizing, one experiences a sense of calm and completeness. Dazed eyes can’t simply look away from it. Further zoom into its surface, it boasts varying textures – tiny and large craters, dark stretches, and rough impacts. Bombarded with asteroids and meteorites colliding with the lunar surface, it comes out beautifully undone. The moon is perfectly imperfect.

The KonstruktTM Lunar Series is inspired by the aesthetically fascinating features of the moon. Each faux finish is striking but not overwhelming to the eye. The minimalist appeal and sleek ambiance add a flair of sophistication to any living space. Its simplicity and versatility render it as a perfect backdrop to highlight centerpieces. It is subtle but impactful – luxurious without being indulgent.

SURFACE PREPARATION:

•     Remove honeycomb and loose concrete.

•     Check and repair all relevant surface defects (i.e., cracks, gaps) by corrective civil works, water proof as necessary.

•     Make sure that the surface to be coated is clean, dry and that good weather persists prior to application.

MIXING AND APPLICATION PROCEDURE:

1.   For leveling concrete walls, please follow mixing and application procedures of Konstrukt™ Permaplast™ K–202 High Performance Acrylic Render below:

•     Stir Konstrukt™ Permaplast™ K–202 High Performance Acrylic Render using mixing device to attain consistency.

•     Transfer mixture to another clean bucket, mix it with Portland cement (1:1 ratio) using a mixing device until desirable consistency is attained.

•     Using a steel trowel, apply the mixture thinly on the surface by pressing the edge of the trowel firmly on the concrete until all areas are covered. Apply mixture not less than 3mm and not more than 5mm thickness.

•     Allow at least thirty (30) minutes to dry before spray application for desired texture finish.

2.   For coarse texture finish, please follow mixing and application procedures of Konstrukt™ Permaplast™ K–202 High Performance Acrylic Render below:

•     Stir Konstrukt™ Permaplast™ K–202 High Performance Acrylic Render using mixing device to attain consistency.

•     Transfer mixture to another clean bucket, mix it with Ordinary Portland Cement using a mixing device until spray able consistency is attained.

•     Spray the mixture using a mortar gun. Spray until desired coarse texture is attained.

•     Allow at least seven (7) days curing prior to painting schedule. (Depending on weather condition.)

•     No need to neutralize the surface.

PAINTING SYSTEM PROCEDURE:

•     Apply a single coat of BOYSEN® AcrytexTM Sealer B-1708

•     Let it dry for at least two (2) hours before application of BOYSEN® Matte ShieldTM B-4600

•     Apply two (2) coats of BOYSEN® Matte ShieldTM B-4600 with two (2) hours coat interval

•     When using roller, make sure to use paint tray to remove excess paint and apply thinly to prevent roller marks.

Application by spray is advised to prevent lap marks.

DESCRIPTION: Lunar Series

From afar, the moon gleams exquisitely at sundown. It envelopes the night with mysterious aura, silently luring a curious spectator in. Its lulling presence pacifies the hardness of the day. Utterly hypnotizing, one experiences a sense of calm and completeness. Dazed eyes can’t simply look away from it. Further zoom into its surface, it boasts varying textures – tiny and large craters, dark stretches, and rough impacts. Bombarded with asteroids and meteorites colliding with the lunar surface, it comes out beautifully undone. The moon is perfectly imperfect.

The KonstruktTM Lunar Series is inspired by the aesthetically fascinating features of the moon. Each faux finish is striking but not overwhelming to the eye. The minimalist appeal and sleek ambiance add a flair of sophistication to any living space. Its simplicity and versatility render it as a perfect backdrop to highlight centerpieces. It is subtle but impactful – luxurious without being indulgent.

SURFACE PREPARATION:

•     Remove honeycomb and loose concrete.

•     Check and repair all relevant surface defects (i.e., cracks, gaps) by corrective civil works, water proof as necessary.

•     Make sure that the surface to be coated is clean, dry and that good weather persists prior to application.

MIXING AND APPLICATION PROCEDURE:

1.   For leveling concrete walls, please follow mixing and application procedures of Konstrukt™ Permaplast™ K–202 High Performance Acrylic Render below:

•     Stir Konstrukt™ Permaplast™ K–202 High Performance Acrylic Render using mixing device to attain consistency.

•     Transfer mixture to another clean bucket, mix it with Portland cement (1:1 ratio) using a mixing device until desirable consistency is attained.

•     Using a steel trowel, apply the mixture thinly on the surface by pressing the edge of the trowel firmly on the concrete until all areas are covered. Apply mixture not less than 3mm and not more than 5mm thickness.

•     Allow at least thirty (30) minutes to dry before spray application for desired texture finish.

2.   For coarse texture finish, please follow mixing and application procedures of Konstrukt™ Permaplast™ K–202 High Performance Acrylic Render below:

•     Stir Konstrukt™ Permaplast™ K–202 High Performance Acrylic Render using mixing device to attain consistency.

•     Transfer mixture to another clean bucket, mix it with Ordinary Portland Cement using a mixing device until spray able consistency is attained.

•     Spray the mixture using a mortar gun. Spray until desired coarse texture is attained.

•     Allow at least seven (7) days curing prior to painting schedule. (Depending on weather condition.)

•     No need to neutralize the surface.

PAINTING SYSTEM PROCEDURE:

•     Apply a single coat of BOYSEN® AcrytexTM Sealer B-1708

•     Let it dry for at least two (2) hours before application of BOYSEN® Matte ShieldTM B-4600

•     Apply two (2) coats of BOYSEN® Matte ShieldTM B-4600 with two (2) hours coat interval

•     When using roller, make sure to use paint tray to remove excess paint and apply thinly to prevent roller marks.

Application by spray is advised to prevent lap marks.

Choose Color

For technical reasons connected with color reproduction and paint manufacturing, these patterns may not exactly match the paint color.

Konstrukt Lunar Series Kanyon
 
Konstrukt Lunar Series Kanyon