Boysen® Permacoat™ is a 100% acrylic latex paint with excellent hiding, durability and dirt pick – up resistance. It finishes painting jobs in less coats, yet lasts longer than other brands allowing you to save a lot on time, effort, worry and money.
AVAILABILITY: 4-li and 16-li packaging
COVERAGE: 25 to 30 square meters per 4 liters per coat
DRYING TIME: 1-2 hours
DRY FILM THICKNESS: 1.5 mils
APPLICATION: paint brush, roller, or airless spray
THINNING: Use as supplied. If necessary, thin with not more than ½ liter of clean water per 4-liter can.
TINTING: Use only Boysen® Latex Colors to achieve pastel shades.
Factory premixed colors is recommended especially when preparing darker shades.
|
SURFACE PREPARATION:
1. Remove all loose, scaling, flaking, and peeling off paint by wire brushing, scraping, or rough sanding.
2. When necessary, use Boysen® Paint and Varnish Remover #141 but make sure that residue is completely washed off from the surface to prevent adverse reactions with succeeding coats. Let it dry.
3. Sand smooth painted surfaces for improved inter-coat adhesion.
4. For chalking old latex paint, apply one (1) coat of Boysen® Chalk Blocker #7304. Let dry overnight.
5. In case of mildew infestation, treat affected areas with a fungicidal wash solution or household bleach mixed with water (1:3, respectively). Let the treatment stay overnight before wiping off residue with damp cloth. Let dry.
PAINT APPLICATION:
1. Prime bare substrate with Boysen® Permacoat™ Latex Flat #701. Let dry for one (1) hour.
2. Putty minor surface imperfections with Boysen® Masonry Putty #7311. Let dry for one (1) hour. Spot prime puttied portions.
3. Finish with two (2) coats of Boysen® Permacoat™ Latex* to your desired premixed shade. Let dry for one (1) hour in between coats.
*Selections for topcoat:
·Flat Latex #701
·Semi-Gloss Latex #715
·Gloss Latex #710
|