|
DESCRIPTION: BOYSEN® Clear Dead Flat Lacquer B- 1253 is a nitrocellulose, solvent-based, flat lacquer varnish finish that dries to a hard, durable film. Its high-build properties make an ideal choice for furniture, fixtures, and other woodworks.
PRINCIPAL USES: BOYSEN® Lacquer Products are ideal for interior sealed wood such as furniture, store fixtures, cabinets, doors, and panels.
SERVICE CONDITIONS: If necessary, add approximately 10% by volume of BOYSEN® Lacquer Flo B-1205 to the ready-to-use mixture.
FINISH: Flat
DRY TIME:
Touch: 10 minutes
Recoat: 30 minutes
THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq.m.
*Depending on surface texture and porosity
TINTING: Do not tint.
THINNING SOLVENT: BOYSEN® Lacquer Thinner B-50
CLEAN-UP SOLVENT: BOYSEN® Lacquer Thinner B-50
PACKAGING: 1-Liter, 4-Liters and 16-Liters
APPLICATION: By spray
|
|
DESCRIPTION: BOYSEN® Clear Dead Flat Lacquer B- 1253 is a nitrocellulose, solvent-based, flat lacquer varnish finish that dries to a hard, durable film. Its high-build properties make an ideal choice for furniture, fixtures, and other woodworks.
PRINCIPAL USES: BOYSEN® Lacquer Products are ideal for interior sealed wood such as furniture, store fixtures, cabinets, doors, and panels.
SERVICE CONDITIONS: If necessary, add approximately 10% by volume of BOYSEN® Lacquer Flo B-1205 to the ready-to-use mixture.
FINISH: Flat
DRY TIME:
Touch: 10 minutes
Recoat: 30 minutes
THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq.m.
*Depending on surface texture and porosity
TINTING: Do not tint.
THINNING SOLVENT: BOYSEN® Lacquer Thinner B-50
CLEAN-UP SOLVENT: BOYSEN® Lacquer Thinner B-50
PACKAGING: 1-Liter, 4-Liters and 16-Liters
APPLICATION: By spray
|
|
SURFACE PREPARATION:
Sand surface until wood is smooth to the touch. Hammer all nails deep enough to apply wood filler. Dust off surfaces completely then wipe with a clean rag. If repainting, remove all paint by using manual or mechanical methods prior to the application of BOYSEN® lacquer products.
PAINTING SCHEDULE:
Stain: BOYSEN® Oil Wood Stain (optional)
Sealer Coat: BOYSEN® Lacquer Sanding Sealer B-1254, sanded lightly before topcoat application
Final coat: BOYSEN® Clear Dead Flat Lacquer B-1253
|
-1658734992963.jpg "BOYSEN<sup>®</sup> Clear Dead Flat Lacquer B-1253")
