Boysen® KNOxOUT™ Air Cleaning Paint
Features:
DESCRIPTION : Boysen® KNOxOUT™ is the first air cleaning paint in the world with CristalActiv photocatalytic technology. It uses light energy to break down noxious air pollutants and convert them into harmless substances. Any surface coated with KNOxOUT™ becomes an active air-purifying surface that helps protect people from harmful gases. Photocatalysis also provides KNOxOUT™ with self-cleaning, anti-bacterial and de-odorizing properties.
PRACTICAL USE : Boysen® KNOxOUT™ will be of benefit in areas with high NOx levels, such as indoor car parks and outdoor houses and buildings in urban areas.
TYPICAL PROPERTIES
Variants: B8701 Acrylic or B8702 Silicon
Finish : Flat
Dry time
Theoretical Coverage : 25-30 sq. meter/4 liters/ one coat
Wet film Thickness : 110-120 microns
Dry Film Thickness : 40-45 microns
Visit the KNOxOUT™ paint website for more information.
 |
Instructions |
APPLICATION METHOD
Tools : Brush, Roller, Airless Spray
APPLICATION SYSTEM
SURFACE PREPARATION:
New Masonry:
Allow new masonry to dry for 14 to 28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. Treat new masonry with a solution of 1 part Boysen® Masonry Neutralizer #44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting.
Repainting:
Remove all loose, scaling, flaking and peeling off paint using Boysen® Paint and Varnish Remover #141, wire brushing, scraping, or water blasting. Let it dry. Sand smooth painted surfaces for improved adhesion. Apply 1 coat of Boysen® Chalk Blocker for chalking old paint. In case of mildew infestation, treat with fungicidal wash solution or bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, allow to stand on surface for overnight before washing off residue. Let dry.
-
Apply 1 coat B-105 Boysen® Ecoprimer™
-
Putty minor surface imperfections with Boysen® Masonry Putty #7311 for interior masonry and Boysen® Acrytex™ Cast #1711 for exterior masonry. Spot prime puttied areas.
-
Apply 2 coats B8701- Boysen® KNOxOUT™ Air Cleaning Paint Acrylic or B8702- Boysen® KNOxOUT™ Air Cleaning Paint Silicon
