Choose Your Paint


Suggested Plastering
Konstrukt Permaplast

Suggested Plastering
Konstrukt Permaplast

DESCRIPTION: Boysen® DECORe™ is a unique water-based decorative paint system that can simulate the complex texture and distinctive finish of the European masters right in your home. Unlike traditional faux finishes, Boysen® DECORe™ does not need elaborate intermixing of colors, layering techniques or sophisticated equipment. Simple effortless, brushing is all that’s required to achieve this very exquisite finish.

PRINCIPAL USES: Use it on concrete walls, wood, and drywalls for interiors

DECORe™ Undercoat – 20 – 25 sq.m./4 liters /coat                    
DECORe™ Base + Toner – 25 –30 sq.m./4-litersl/coat

SURFACE DRY: Two (2) hours

THINNING: Use as supplied.

APPLICATION: By brush using 3” Diamond (China) brush and Boysen® DECORe™ plastic scraper

4-liters B-4605 DECORe™ Undercoat  
4-liters B-4610 DECORe™ Base
200 ml B-4700 DECORe™ Toner

B4730    Light Gray
B4741    Aqua Blue
B4742    Light Blue
B4743    Deep Blue
B4750    Dark Green  
B4762    Medium Yellow  
B4763    Bright Yellow
B4771    Soft Red  
B4772    Brick Red
B4780    Brown


Allow new masonry to dry for 14 to 28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. Treat new masonry with a solution of 1 part Boysen® Masonry Neutralizer #44 diluted in 16 parts water, applying liberally by brush. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting. No need for neutralizers in case Boysen® Acrytex™ Primer #1705 is used as primer.


Apply Boysen® Permacoat™ Flat Latex #701 (100% acrylic, water-based) or Boysen® Acrytex™ Primer #1705 (solvent-based acrylic, water-tight) as primer for concrete.

After primer application, apply Boysen® DECORe™ Undercoat #4605 by brush or roller and fully cover the surface. Let dry.

Note : The design can only be achieved using Boysen® DECORe™ Undercoat.

After choosing the desired color, mix Boysen® DECORe™ Toner into Boysen® DECORe™ Base #4610. A color can be applied in different tones by varying amount of toner used, either Full, One-half, One-Fourth, or any other proportion depending on desired shade. Stir until uniform consistency is achieved. DO NOT THIN MIXTURE WITH WATER OR ANY SOLVENT.

Using a 3” Diamond (China) Boysen® DECORe™ brush, apply from top corner, working with short crisscrossing strokes. If a more uniform pattern is desired, stroke with a clean brush while paint is still wet.

Note: The design may not be achieved if a different paint brush is used.

Allow 8 to 10 minutes after applying Boysen® DECORe™ before lightly combing using the plastic scraper again in long crisscrossing strokes, with the scraper inclined and close to the surface.

Choose Color

For technical reasons connected with color reproduction and paint manufacturing, these patterns may not exactly match the paint color.

1 Toner B4730 Light Gray
1 Toner B4743 Deep Blue
1 Toner B4763 Bright Yellow
1 Toner B4780 Brown
¼ Toner B4742 Light Blue
¼ Toner B4762 Medium Yellow
¼ Toner B4772 Brick Red
½ Toner B4741 Aqua Blue
½ Toner B4750 Dark Green
½ Toner B4771 Soft Red
1 B4741 Aqua Blue
1 B4750 Dark Green
1 B4771 Soft Red
¼ Toner B4741 Aqua Blue
¼ Toner B4743 Deep Blue
¼ Toner B4763 Bright Yellow
¼ Toner B4780 Brown
½ Toner B4742 Light Blue.
½ Toner B4762 Medium Yellow
½ Toner B4772 Brick Red
1 Toner B4742 Light Blue
1 Toner B4762 Medium Yellow
1 Toner B4772 Brick Red
¼ Toner B4730 Light Gray
¼ Toner B4750 Dark Green
¼ Toner B4771 Soft Red
½ Toner B4730 Light Gray
½ Toner B4743 Deep Blue
½ Toner B4763 Bright Yellow
½ Toner B4780 Brown


Get the Flash Player to see this player.