Boysen® Permacoat™ is a 100% acrylic latex paint with excellent hiding, durability and dirt pick – up resistance. It finishes painting jobs in less coats, yet lasts longer than other brands allowing you to save a lot on time, effort, worry and money.
AVAILABILITY: 4-li and 16-li packaging
COVERAGE: 25 to 30 square meters per 4 liters per coat
DRYING TIME: 1-2 hours
DRY FILM THICKNESS: 1.5 mils
APPLICATION: paint brush, roller, or airless spray
THINNING: Use as supplied. If necessary, thin with not more than ½ liter of clean water per 4-liter can.
TINTING: Use only Boysen® Latex Colors to achieve pastel shades. Do not use Hansa Yellow B1466 and Toluidine Red B1407 for exterior application. Factory premixed colors is recommended especially when preparing darker shades.
|
SURFACE PREPARATION:
1. Allow new masonry to dry for 14 to 28 days under normal weather conditions. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar.
2. Treat new masonry with a solution of 1 part Boysen® Masonry Neutralizer #44 diluted in 16 parts water, applying liberally by brush or roller. No need to neutralize in case Boysen® Acrytex™ Primer #1705 is used as pirmer.
3. Let it stand overnight before rinsing with water or rough sanding to remove white crystals that form on the surface.
4. Let dry before painting.
PAINT APPLICATION:
1st Coat:
Boysen® Permacoat™ Flat Latex #701 (100% acrylic, waterbased) or
Boysen® Acrytex™ Primer #1705 (solvent-based acrylic, water-tight)
Putty: Boysen® Acrytex™ Cast #1711
2nd & 3rd Coat: Boysen® Permacoat™ Latex*
*choice of: Flat #701, Semi-Gloss #715, Gloss #710
|